1. UNDERGROUND KITS
These are available for swing gates. They could particularly be used for either a new site where excavation can be done while builders and electricians are available, or when a new driveway and piers are to be put in place. The kit can be installed for the gates at a future date if necessary.

Kit includes
• Control Panel
• 2 Motors
• 2 Underground Boxes
• 1 Set of photocells
• Remote Controller

2. ABOVE GROUND KITS

These can be used for new gates where underground excavation is not easily accessible or for existing gates

Kit includes
• Gear motor with built-in control panel & radio receiver
• Pair of safety photocells
• Remote control Antenna
• Flashing light Key
• SwitchMounting plate
• 3 metres Rack

3. SLIDING GATE KITS
Designed to automate any kind of sliding gate for residential or commercial use.

The SPEED series of gear motors has been designed to automate any kind of sliding gate for residential or apartment complex etc.

There is also a range for Industrical use.All information is available on TAU website. www.tauitalia.com

4. AUTOMATIC BARRIER KITS
Electromechanical barrier with 12 V dc motor, ideal for private and public car parks or entrances

Characteristics and use:
• 230 Vac power input, the 12 V dc motor offers continuous andreliable performance
• Continues to work even in the event of a power failure thanks to the optional 12 V dc rechargeable battery
• Fitting for a flashing lamp on the safety casing and photocells directly on the body of the barrier
Electronically controlled anti-crush safety feature
• Opening and closing deceleration feature
• Easy to install: the bar is mounted centrally and can open either to the right or the left
• Painted or stainless steel cabinet
• Manual release feature.